Flower Power Part I

I get inspiration for projects from just about anywhere. I scour magazines, catalogs, website, and stores looking for things that I can recreate with my own flare. This project came to me when I was shopping with some friends and one of them picked up a cute flower pin/clip and said this is cute. Of course I said "I can make that" (sounding just like my husband). So this is Flower Power Part I because I am planning a few variations but wanted to get the ball rolling.

You will need:

A few scraps of fabric (feel free to mix and match). I chose thick tweed from this blazer I picked up at Goodwill for $2.

Pin/Clip
Button

Thread

Hot Glue

Print out the pattern. Trace and cut eight petals on the fabric of your choice.

 

If the fabric you choose is lightweight and will not be as sturdy as you had hoped, use starch spray to stiffen the fabric. Next you want to take a petal, pinch the small end, approximately 1-inch from the end, and sew an X securing the two sides together. I crossed the X about 4 times for each petal. Next cut approximately a 1/2-inch off the end creating a flat end.

Once you have all the petals stitched and cut you are ready to put them together. Take the petals and start your stitch through the X of one petal, loop around the flat end of the petal and back through the X you just started with, next thread the second petal, going through the X and again loop around the flat end and go back through the second petal X. Continue this process until you have all eight petals strung. Remember to keep the thread tight. Once all the petals are strung tie off the tread securing the circle. The flower may be a bit floppy, don't worry.

Next take the hot glue gun and put a bead of glue between the petals as close to the X as possible. You can also add a small bead of glue near the top of the petal to secure the petals.

Once all the petals are where you want them put a small bead of glue in the center and place the button. Flip the flower over and glue the pin/clip onto the back and away you go!

Enjoy!

 Sammy Gene